33
a. Turn the power off.
b. Undo the 2 truss screws and remove the
side door from the cabinet.
c. The interference prevention wire is
connected to the IC board inside the
cabinet.
d.
If multiple units of the same game are
installed side by side, make sure that the
game units that are connected to the
interference prevention wires are
arranged so that they alternate with the
units that are not connected.
INTERFERENCE PREVENTION WIRING
HDF-60032
Summary of Contents for HOUSE OF THE DEAD 4 SUPER DELUXE
