Rev.1.2 – 7.2018.EL950.1.3.1086C
32
ADVANCED
A password is required to enter this menu. The factory default password is 2314. The following
sub-menus are available under this sub-menu:
•
Beep Enable
•
Temp
•
Optics Disables
•
Selection Style
•
Motor Type
BEEP ENABLE
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 4 for Configuration
Configuration
3.
Press 0 for Advanced Config
Password:
Use keypad to enter password
4.
Press 1 for Beep Enable menu
Beep Enable (Current Setting)
*-Exit, no change 1-Edit
5.
Press 1 to toggle ON/OFF
Beep Enable (Choice Flashing)
*-Exit, no change # to Save
6.
Press # to save the setting
Beep Enable (New Setting)
*-Exit, no change 1-Edit
7.
Press * three times to exit
0.00
OPTICS DISABLES
Note: Must be set to ON.
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 4 for Configuration
Configuration
3.
Press 0 for Advanced Config
Password:
Use keypad to enter password
4.
Press 2 for Optics Disables menu
Optics Disables (Current
Setting)
*-Exit, no change 2-Edit
5.
Press 2 to toggle ON/OFF
Optics Disables (Choice
Flashing)
*-Exit, no change # to Save
6.
Press # to save the setting
Optics Disables (New Setting)
*-Exit, no change 2-Edit
7.
Press * three times to exit
0.00