Seaga SM16S, Service And Parts Manual

Page: 23 / 72

Rev.1.2 – 7.2018.EL950.1.3.1086C 23
*-Exit, no change #-Save
17. Press # to Save the Coupon1 Value setting
Coupon1: $(New Value)
*-Exit, no change #-Save
18.
Press * two times to continue to Coupon2 – 5 or press * five
times to exit.
Price Program
COUPON BY ITEM
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 4 for Coupons
Coupons
*-Exit, no change
4.
Press 1 for Coupon1 (or corresponding number for
additional coupons, up to Coupon5)
Coupon1
*-Exit, no change #-Save
5. Press 1 for All Items to verify Off
All Items (Current Setting)
*-Exit, no change #-Save
6. Press 1 to toggle On/Off if necessary
All Items (Choice Flashing)
*-Exit, no change #-Save
7. Press # to Save the new setting to Off if necessary
All Items (New Setting)
*-Exit, no change #-Save
8. Press * to return to Coupon1 Coupon1
9. Press 3 to enter an Item
Selection: --
*-Exit
10. Enter Item Number
Selection: XX (Current Setting)
*-Exit, /Del 1-Edit
11. Press 1 to toggle Item On/Off
Selection: XX (Choice
Flashing)
*-Exit, no change 1-Edit
12. Press # to save the setting
Selection: XX (New Setting)
*-Exit, no change #-Edit
13. Press * twice to return to the Coupon1 menu Coupon1
14. Press 4 to enter Coupon Value menu
Coupon1: $0.00
*-Exit, no change #-Edit
15. Press # to edit Coupon1 value
Coupon1: $0.00
*-Exit, no change #-Save
16. Enter Coupon1 value
Coupon1: $0.00
*-Exit, no change #-Save
17. Press # to Save the Coupon1 value setting
Coupon1: $(New Value)
*-Exit, no change #-Save
18.
Press * two times to continue to Coupon2 – 5 or press * five
times to exit.
Price Program
TOKEN
IMPORTANT: This option requires a programmed changer and allows you to set the value of
tokens accepted. Note: If Space to Sales Whole Machine is On and you are setting Tokens by Row, the
Row must be set to Row 1. If using both coupons and tokens, there are only five selection combinations
available. For example, if Coupon1 is set for “All” items, Token1 is also set for “All” items.
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 1 for Price Program Price Program