Rev.1.2 – 7.2018.EL950.1.3.1086C
8
1. To Load Product in Snack Unit:
a. Pull the desired product tray all the way forward. Product tray will tilt down.
Note:
Pull out only one (1) product tray at a time
b. Place product in proper size coil.
Note:
Bottom of product must rest on
the product tray and not on the
Coil. Load each column from back to front.
Note:
Fill all product trays fully; do not leave any spaces behind or between items
c. Once product tray is fully loaded, lift and push it back in.
Repeat steps a through c until all product trays are fully loaded. Special Note: We suggest that you always
partially fill the tray with product and perform at least five (5) test vends. Test vends can be performed easily
by entering Service mode and using the test function.
PRODUCT LOADING
Snack Unit
Wide products such as Chips bags etc. are loaded in Tray 1 and Tray 2. Narrow products such as Candy
bars are loaded in Tray 3. See Figures 7a and 7b.
Figure 7a – Loading Product
Figure 7b – Loading Product
Correct – load
product between
coils, resting on
the product tray,
never on the
bottom loop of
the coil.
Incorrect
Coil
Product Tray
Incorrect
Incorrect
Correct – load product between coils,
resting on the product tray.
