Rev.1.2 – 7.2018.EL950.1.3.1086C
37
SET POINT
Displays the factory default Set Point temperature for each machine type. See Temp section for
the specific machine refrigeration modes. Ambient snack machines without a refrigeration system
will display 43 °F.
These temperatures may be adjusted,
however it is not advised without direction by an
authorized technician
.
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 5 for Options Menu
Options
3.
Press 8 for Set Point
Setpoint (Current Setting)F
*-Exit 8-Edit
4.
Press 8 to edit the temperature Set Point
Setpoint (Choice Flashing)F
*-Exit #-Save
5.
Continue pressing 8 until the desired temperature is
shown on the display
Setpoint (New Temp)F
*-Exit 8-Edit
6.
Press # to save the setting
Setpoint (New Setting)F
*-Exit 8-Edit
7.
Press * three times to exit
0.00
SENSITIVITY ADJUST
Allows you to adjust the Drop Sensor Sensitivity for each Beverage lane (140-146)
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 5 for Options Menu
Options
3.
Press 9 for Sensitivity Adjust
Sensitivity Adjust
*-Exit 3-Edit by Selection
4.
Press 3 to adjust the sensitivity on the drop sensors by
selection.
Selection: ___
*-Exit #-Save
5.
Press the selection number you wish to change. NOTE:
Only beverage selections have a drop sensor to adjust
(selections 140 through 146). Press 1 to edit the
sensitivity to High, Medium or Low.
Selection: 145 HIGH
*-Exit 1-Edit
6.
Press # to Save your changes.
Selection: 145 (new setting)
*-Exit 1-Edit
7.
Press * three times to exit
0.00
6. ADVANCED*
This menu requires a password. The following sub-menus are included in the Advanced Features
menu:
•
Discount
•
Shutdown
•
Exact Change
•
Energy Savings
•
Unconditional
Acceptance
•
Pair
•
Max Change
•
Degrees