Seaga SM16S, Service And Parts Manual

Page: 42 / 72

Rev.1.2 – 7.2018.EL950.1.3.1086C 42
5. Press 2 to set Alt Rules
Alt Rules (Current Setting)
*-Exit 2-Edit
6. Press 2 to toggle ON/OFF (default ON)
Alt Rules (Choice Flashing)
*-Exit #-Save
7. Press # to save the setting
Alt Rules (New Setting)
*-Exit 3-Edit
8.
Press * two times to exit
0.00
UNCONDITIONAL ACCEPTANCE
Sets the unconditional acceptance value. All cash box coins or bills equal to or less than this set
value will be accepted, even if the changer cannot return an equal amount of change. When set
to 0 (zero), all changer tube coins are accepted. Bills are accepted once there is enough change
in the changer to pay back the bill type. Note: the Unconditional Acceptance set value is
adjustable but the maximum value is equal to the largest denomination of currency or coin
accepted by the changer or validator.
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 3 for Unconditional Acceptance menu
Uncond Accept: (Current Setting)
*-Exit #-Edit
5. Press 3 then enter value
Uncond Accept: (New Setting)
*-Exit #-Save
6. Press # to save the setting
Uncond Accept: (New Setting)
*-Exit #-Save
7.
Press * two times to exit
0.00
MAX CHANGE
This option prevents change from being returned to the customer until the amount of credit has
been reduced to a value less than or equal to the programmed maximum change limit.
STEP DISPLAY
1. Press Service Mode Button Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 4 for Max Change menu Max Change
5. Press 1 for current Max Change setting
Max Change (Current Setting)
*-Exit 1-Edit
6. Press 1 to toggle ON/OFF
Max Change (Choice Flashing)
*-Exit #-Save
7. Press # to save the setting
Max Change (New Setting)
*-Exit 1-Edit
8. Press 2 and enter dollar amount
Max Change: $--.—
*-Exit #-Save
9. Press # to save the setting
Max Change (New Setting)
*-Exit 2-Edit
7.
Press * three times to exit
0.00
SHUTDOWN
This menu sets the VMC to shut down All Items, by Row or by Selection, based on four (4) time
of day intervals. If the time falls within one of these intervals and the entire machine has been
selected for shutdown, then the message, “Vending Operation to Resume at hh.mm,” will be
displayed.