Rev.1.2 – 7.2018.EL950.1.3.1086C
7
Figure 5 – Main Power Connection
Connect the snack unit to the beverage unit with the jumper power cord. Then connect the beverage unit
power cord to wall socket with power. Using a power strip is recommended. CAUTION: to avoid risk of
electrical shock, the power to the wall socket should be made last of all connections.
LOADING PRODUCT TRAYS
Open the front door of vendor, and lift up the plastic lock lever on the right side of the tray to unlock. Holding
the lever up, grasp the tray and lift the front of the tray slightly and pull forward. The tray will slide out and
then tilt down to make loading of products easier. Load only one product tray at a time (See Figure 6).
Figure 6 – Slide-out product trays
Lift up plastic lock
lever
Grasp tray
while
holding up
lever and
pull
forward
Jumper Cord – FIRST
connect Snack to Beverage
Power Cord – connect Beverage
to wall socket LAST
