Rev.1.2 – 7.2018.EL950.1.3.1086C
41
20.
Press * two times to return to Discount menu
Discount
21.
Press 6 two times for Stop Time menu
Stop Time
22.
Press 6, then enter Start Time in 24-hr time (HH:MM)
New Time
*-Exit #-Save
23.
Press # to save the time
New Time
*-Exit 6-Edit
24.
Press * two times to return to Discount menu
Discount
25.
Press 7 for Discount Value menu
Discount (Current Value)
*-Exit 7-Edit
26.
Press 7, then enter new Discount Value (Enter the new
price at which to sell the item)
Discount (New Value)
*-Exit #-Save
27.
Press # to save the discount value
Discount (New Setting)
*-Exit #-Save
28.
Press * two times to return to Discount menu
Discount
29.
Press 9 for Enable Discount menu
Enable (Choice Flashing)
*-Exit 9-Edit
30.
Press 9 to toggle Enable ON/OFF
Enable (Choice Flashing)
*-Exit #-Save
31.
Press # to save the setting
Enable (New Setting)
*-Exit 9-Edit
32.
Press * five times to exit to Sales Mode
0.00
EXACT CHANGE
Sets the coin tube value that will trigger the display to show Please Use Exact Change message.
For example, if Exact Change is set to $5.00, the message will display when the total of coins in
the tube, as counted by the VMC, is at or below $5.00 total.
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 6 for Password (Advanced Features) Menu
Password
3.
Enter Password (default 2314)
Advanced Features
4.
Press 2 for Exact Change
Exact Change $--.00
*-Exit 1-Edit
5.
Press 1 to edit Exact Change
Exact Change (Flashing)
*-Exit 1-Edit
6.
Use number keys to enter an amount
Exact Change (New Setting)
*-Exit 1-Edit
7.
Press # to save the setting
Exact Change (New Setting)
*-Exit #-Save
8.
Press * two times to exit
0.00
ALTERNATE RULE – This function prevents a vend from occurring, flashes the Please Use
Exact Change message and will return the established credit amount if one or more of the coin
tubes are too low to give back the correct change for the vend. Note: This setting must be OFF if
using a bill validator only. If using a bill validator only, prices must be divisible by the
denominations accepted by the bill validator.
STEP
DISPLAY
1.
Press Service Mode Button
Motor Count or Error Code **
2.
Press 6 for Password (Advanced Features) Menu
Password
3.
Enter Password (default 2314)
Advanced Features
4.
Press 2 for Exact Change
Exact Change $--.00
*-Exit 1-Edit
