Rev.1.2 – 7.2018.EL950.1.3.1086C
64
Bill Validator
My vendor won’t accept bills, what do I do?
1. Make sure the bill acceptor is clean and there are no jams or debris inside of the acceptor.
Beverage Vending
My beverages aren’t vending at all.
1. Make sure all items are loaded correctly.
2. Make sure shim is in correct place and back gate is adjusted properly.
Power
I can see and hear the cooling deck fans, but there is no power to the rest of the machine. What does this
mean?
1. Check the transformer on the floor of the machine. There is a cover that goes over the
transformer with access to the small breaker switch on top of the transformer. Press the
breaker switch to reset the transformer. This should cause the machine to power back up.
Check to make sure that the main power harness that runs from the transformer to the VMC. Make sure all
connections are good.
