Scientific Atlanta PowerVu D9234, Installation And Operation Manual

Page: 56 / 78

$²
Operating Specifications (cont’d) Description
Video output level: 1.0 V p-p
r 10%
Audio output level: 2V RMS @ 10 K (max.)
Video Signal-To-Noise-Ratio:
t 56 dB
Maximum video resolution : 704 x 576
Aspect Ratio: 4X3 and 16X9 transmission compatible (where available, and enabled at PCC system uplink)
VBI reinsertion: WST and NABTS
RF video signal input level: -30 dBm through -60 dBm per carrier
L-Band Frequency range: 950 MHz through 2150 MHz
Frequency response: Up to 5 MHz
Variable symbol rate: 3.0 through 30.8 MSymbols/s
Viterbi (inner) FEC: 1/2, 2/3, 3/4, 5/6 or 7/8
Viterbi (outer) FEC: Reed Solomon, T=8
VBI insertion: NTSC (VBI lines 10 through 22) or PAL (VBI lines 7 through 22)
Input/Output Connectors and Controls Description
RF IN: F type
ANT IN: F type or IEC type
TV OUT (NTSC) or UHF OUT (PAL): F type or IEC type
TV Modulator channel selector CH3/CH4 (NTSC US), CH1/CH2 (NTSC Japan) rotary dial CH 30–39 (PAL G/I) switch
TSG (Test Signal Generator) ON/OFF TSG slide switch (PAL models only)
PAL G/I standard selector PAL G/I slide switch (PAL models only)
VIDEO (out): RCA type
S-VIDEO (out): 4-pin mini-DIN
AUDIO, L & R, unbalanced (out): 2 (RCA type)
EXPANSION PORT: 25-pin D, female (Low-Speed Utility Data)
WIDEBAND DATA port 9-pin D, female (Wideband Broadcast Data)
LNB PWR (drive voltage) ON/OFF: 13/19 VDC @ 250 mA max. (15 VDC @ 250 mA max. – optional [Japan only])