Scientific Atlanta PowerVu D9234, Installation And Operation Manual

Page: 33 / 78

To change the Lock Level
Step 1. Move to Lock Level and press SELECT to replace the current setting.
Step 2. Enter a valid Lock Level (number) and then press SELECT. You can also press
the
Ï / Ð arrow buttons to display available settings (Lock Levels are displayed
from 0 through 3). The default setting is 0.
A pop-up displays for entering the current Password.
Step 3. Enter the current Password and press SELECT (for security, a default charac-
ter is substituted for each button pressed).
Step 4. Move to Exit and press SELECT, or press 1 and then press SELECT to change
the current setting.
A pop-up menu displays Save options.
Step 5. Press 1 to save the new setting (YES), or follow the on-screen instructions, as
required.
The receiver settings are enabled or disabled, depending on the Lock Level set.
Available options:
Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to change the Lock Level setting. Menu options appear grayed-
out if disabled by the current Lock Level setting.
1
Baud Rate and TV Audio options are unlocked
To display the Main Menu (if Lock Level 3 set)
Step 1. Press the MENU button.
An on-screen prompt displays for entering the current Password
(see Figure 11).
Step 2. Enter the current Password and press SELECT to display the Main Menu (for
security, a default character is substituted for each number pressed).
To set the Bouquet ID
Step 1. Move to Bouquet ID and press SELECT to replace the current setting. If nec-
essary, record the current Bouquet ID number for reference.
Step 2. Enter a valid Bouquet ID (number) and then press SELECT. You can also press
the
Ï / Ð arrow buttons to display available settings (numbers are displayed
from 0 through 65535). The default setting is 0.
Step 3. When the desired setting is displayed on-screen, move to Exit and press
SELECT, or press 1 and then press SELECT to change the current setting.
A pop-up menu displays Save options.
Step 4. Press 1 to save the new setting (YES), or follow the on-screen instructions, as
required.
Table 5. Available Lock Levels
Level Description
0 All settings unlocked (receiver lockout disabled)
1 All settings unlocked except Factory Reset and Password options
2 All settings unlocked except Receiver Setup and User Setup 1 options
3 All settings locked (access via Password only)
4 All settings locked (access via remote terminal or PCC uplink signal only)
Figure 11. Password prompt banner display