Scientific Atlanta PowerVu D9234, Installation And Operation Manual

Page: 31 / 78

Once activated, the receiver begins searching for a signal associated with any Net-
work ID. When a possible match is found, the search is temporarily interrupted
while the receiver attempts to synchronize with the found signal. If synchroniza-
tion is successful, the “
Lock, Sig “ status is displayed on-screen, and the settings can
be saved, as required before exiting to video (current channel). If receiver synchro-
nization cannot take place, the signal is discarded and the signal search is auto-
matically resumed. If no signal is found, the signal search continues indefinitely,
and must be manually terminated (see also “
}
About the Search option” and
“…About the Signal State”).
To Find a signal
Step 1. Move to Find and press SELECT to display ON–activating the signal search
(available options are ON and OFF).
Step 2. When a signal is found (“ Lock, Sig “ status display), move to Exit and press
SELECT (or press 1 and then SELECT).
A pop-up menu displays Save options.
Step 3. Press 1 to save the new setting (YES), or follow the on-screen instructions, as
required.
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to search for (i.e., Find) another signal. When the settings are
saved, the Find option is automatically set to OFF. You can also terminate the
search manually by setting the Find option to OFF.