Schweitzer Engineering Laboratories SEL-701-1, Instruction Manual

Page: 129 / 452

Date Code 20011009
SEL-701-1 Monitor
Front-Panel Operation
Front-Panel Main Menu
4.11
Figure 4.14 Set Monitor\Monitor Elements Function.
NOTE:
Within the list of setting categories, press the {ENTER}
pushbutton to view or change specific settings within the
category. To edit a setting, press the {ENTER} pushbutton while
the setting is displayed. The monitor requires Level 2 Access to
edit settings.
Monitor Elements
Press these keys to
move within the list.
Press this key to
select a setting category.
Set Monitor Menu Item Monitor Elements Setting Categories
Press { ENTER } to select
and edit a displayed setting.
You must be in
Access Level 2 to edit
a setting. The relay will
request the Level 2 password
if you have not entered it during
this session or if input IN4 is not asserted.
GENERAL DATA
ENTER
↑↓
THERMAL MODEL ELEMENTS
OVERCURRENT ELEMENTS
JOGGING BLOCK ELEMENTS
LOAD JAM/LOSS ELEMENTS
CURRENT UB ELEMENTS
.
.
.
Use Factory Logic
ESC
ENTER
ENTER