SCHOTT ProLab 4000, Operating Manual

Page: 187 / 228

ProLab 4000 Transmitting data
1 8 7 ba75646e03 12/2012
13.2.3 USB-A interface ( USB Host )
Connect the USB-A interface ( USB Host ) of the ProLab 4000 to the
printer.
13.2.4 Options for data transmission
Data can be transmitted to a PC or external printer via the interfaces,
RS232, USB-B (
USB Device ) and USB-A ( USB Host ).
The following table shows which data is transmitted to the interface in
which way:
1 Connect the USB printer to the USB Host interface.
Data Control Operation / description
Current measured
values of the con-
nected sensor Manual

With <PRINT> .

Simultaneously with every
manual storage process with
<STO> (see page 161).
automatic, at
intervals

Simultaneously with every
automatic storage process
(see page 161).
Stored measured
values Manual

Displayed dataset:
with
<PRINT> after recall
from data storage.

All datasets correspond to the
filter criteria with the
[Print]
function in the memory dis-
play
Calibration
records Manual

Displayed calibration record:
with
<PRINT> after recall
from data memory.
Automatically

For the respective sensor at
the end of a calibration proce-
dure.
Note
The following rule applies: Except for the menus, the display content
is generally downloaded to the interface with
<PRINT> (displayed
measured values, measurement datasets, calibration records).