SCHOTT ProLab 4000, Operating Manual, Page: 185 / 228

ProLab 4000 Transmitting data
1 8 5 ba75646e03 12/2012
13 Transmitting data
13.1 Printing current measurement data
To which interface the measurement data should be output with
<PRINT> is specified in the menu, System / Data output... (see
page 60).
13.2 Transmitting data (to a PC or printer)
The meter has the following interfaces for PC/printer:

RS232 interface (serial interface)
e.g. to connect a PC/printer with the serial interface

USB-B interface USB Device
e.g. to connect a PC

USB-A interface, USB Host
e.g. to connect devices with USB connection (printer, keyboard,
mouse, storage, card reader, barcode scanner, hub etc.)
The interfaces, RS232 (serial port) and USB-B ( USB Device ) are used
to transmit data to a PC and update the meter software.
The USB-A ( USB Host ) also enables the transmission of data to an
external USB printer.
13.2.1 RS232 interface
1 Output the current measurement data to the interface with
<PRINT> .
1 Connect the interface to the PC with the Z390 (PC) cable or to
the printer with the Z393 (ext. serial printer) cable.
2 Set up similar transmission data on the PC/printer:

Baud rate: selectable in the range 1200 ... 115200

Handshake: RTS/CTS + Xon/Xoff

Set on the PC only:
– Parity: none
– Data bits: 8
– Stop bits: 1