SCHOTT ProLab 4000, Operating Manual

Page: 101 / 228

ProLab 4000 Ion concentration
101 ba75646e03 12/2012
9.2.3 Measurement settings
All settings for ion selective measurements are done in the Measuring
menu.
Menu item Setting Description
Measuring
– ISE settings
– Units – mg/l
– mol/l
– mg/kg
– ppm
– %
Selection with which unit the mea-
surement result and calibration
standards should be displayed.
– Ion type Ag , Br , Ca , Cd , Cl , CN , CO2 , Cu ,
F , I , K , Na , NH3 , NH4 , NO3 , Pb ,
S , ION
Selection of the ion type to be
measured
With the ION setting it is possible
to measure ions that are not men-
tioned in the list. Depending on
the selected unit, (see
ISE set-
tings / Units ) a further entry may be
necessary (molar mass of the ion
or density of the solution).
– Blank value correction
– Reference measure-
ment
– Input reference
value...
– Burettes settings... Activate burettes (

) Activating/deactivating the
burette control
INFO: If the burette control is
active, data output to the RS232
interface (printer) is deactivated.