Installation manual
PSC1-C-10 Installation manual V2.6
Page 7 of 173
Version: 57E
1
Important notes
The documentation is part of the product and contains important information on integrating the
module, as well as on their operation and service. The programming and parameterization of the
devices are described in the programming manual. Exact knowledge and understanding of these are an
essential prerequisite for installing or modifying the device function or device parameters.
The documentation is intended for all persons who deal with integration and installation planning and
who carry out assembly, installation, commissioning and service work on the product.
Make sure that those responsible for planning and integration, system and operation, as well as
persons who work independently with the modules, have read and understood the documentation
completely.
The documentation must be made accessible to this group of people in a legible condition.
1.1
Definitions
The term PSC1 is used as the generic term for all derivatives of the PSC1 product line. If reference is
made to a specific derivative in the description, the complete identifier is used.
The term "safe" used in the following refers to categorisation as a safe function for usage up to PL e
according to EN ISO 13849-1 or SIL3 according to EN 61508.
The system software "SafePLC2" is used to configure and program the PSC1 modules.
Internally the modules in series PSC1 comprise two independent processing units. These are termed
system A and system B in the following.
