Installation manual
PSC1-C-10 Installation manual V2.6
Page 13 of 173
Version: 57E
2.4
Operating and service
Prior to installing and removing the module, or disconnecting the signal wires, the module is to be
electrically isolated. For this purpose, all electrically live supply wires to the device are to be switched
off and it is to be checked that there is no electrical power present on the wires.
During the installation and removal of the module, appropriate
measures are to be taken to prevent electrostatic discharges on the external terminals and
connections. Contact with these terminals should therefore remain limited to a minimum; prior to and
during this work you should be earthed, e.g. using an earthing wrist strap.
2.5
Transport/storage
The instructions on transport, storage and correct handling are to be followed.
The climatic specifications as per the sec. "Technical data" are to be met.
