Installation manual
PSC1-C-10 Installation manual V2.6
Page 148 of 173
Version: 57E
The risks to be considered are also given in the applicable directives and standards and are to be
considered specifically by the manufacturer based on the manufacturer's specific knowledge of the
machine.
For machines placed on the market in the EU, the risks to be considered as a minimum are specified in
the EU Machinery directive 2006/42/EC or in the latest version of this directive.
Further information on the risk assessment and the safe design of machines is given in the standards
EN 14121: Safety of machinery - Risk assessment
EN 12100: Safety of machinery - General principles for design.
Measures that are applied to reduce the hazards identified must correspond as a minimum to the
same level as the hazard. Such measures and the requirements on them are also given in examples in
the directives and standards listed above.
12.2
Technical documentation required
Various technical documents are to be delivered by the manufacturer. The minimum scope of these
documents is also given in the applicable directives and standards.
E.g. as per the EU Machinery directive the following documents as a minimum are to be delivered:
Source BGIA Report 2/2008
The documents must be prepared such that they are easy to understand and in the national language.
