schmersal bp408, Installation Manual

Page: 88 / 122

88 Installation manual of system “bp408” - Commissioning
CAUTION!
The motor is damaged if the shafting correction system (readjustment) remains in
operation due to failure of a phase (e.g. contact problems on the drive contactors)
despite the runtime monitoring being activated.
NOTE!
1) The program sequences, times etc. parameterised in the control systems have
been preset by us in the setup menu and in the service menu according to the
present technical data sheets. Here, the parameters must be adapted to the
connected equipment and local conditions during the commissioning by you.
2) The due diligence of the correct parameterisation is the responsibility of the
installation company. Observe the local regulations of the fire protection
experts for the firemen lifts and fire lifts.
3) The setup menu and the service menu can each be locked by a 4-digit code
number. The code numbers serve to protect against unintentional alteration of
the parameters and must be kept carefully by you. Pass on your code numbers
only to authorised persons.
In order to save the individual inputs of the lift system, open the menu option
Save system data parameters in the setup menu under Miscellaneous.
42. To complete the entries, please press »OK« after making the changes and
return to the basic view of the display.