schmersal bp408, Installation Manual, Page: 56 / 122

56 Installation manual of system “bp408” - Installation and assembly
6.5 Assembly of the car terminal box
The car terminal box is attached to the car so that the switches for inspection and
any sockets are easily and safely accessible and the trailing cable can be properly
inserted.
6.6 Installation of absolute encoder system
The bp408 control system can be operated with different shaft-copying systems.
Absolute encoder systems are usually used.
A pair of examples of standard systems are given below. They are adapted for
bp408 control system and thus enable an uncomplicated commissioning. These
systems can also be directly obtained from Böhnke + Partner.
The absolute encoder is installed as described in the installation manual supplied.
The installation of AWG-05 tooth belt system is explained in more detail below.
Figure 36:
Overview of absolute encoder systems
AWG-05
Toothed-belt-based
positioning system
(
/
Elgo Limax
Magnetic-tape-based
positioning system Kübler LEB
Steel-tape-based
positioning system
Cedes APS
Code-tape-based
positioning system
…n-floor
1st floor
2nd floor
shaft pit
shaft head
Return pulley