manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 23 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 23

4. Product specifications

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

23 | 194

PRODUCT SPECIFICATIONS

4.1

APPLICATION PURPOSE

4.1.1

Intended usage of product

The product 

CoaxCenter 6000

 is exclusively determined for processing of following materials:

■

Wire

■

Solid

The materials must be treated in the following way:

■

Cut through

■

Incision

■

Stripping

■

Crimping

■

Quality control

■

Tinning

See also chapter 

"5  Product description (Page  29)"

.

As limits the areas in the technical data apply. Any other use of this product is regarded as non-inten-

ded use. For damages arising therefrom, 

Schleuniger

 is not liable.

4.1.2

Reasonably foreseeable misuse

The product 

CoaxCenter 6000

 is not intended for the processing of materials with the following char-

acteristic:

■

Explosive

■

Flammable

■

Toxic

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments