manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 141 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 141

13. Maintenance / maintenance schedule

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

141 | 194

4.

▹

Position the supplied calibration pin between

the centering of the rotary incising unit and

clamp with the two buttons.

5.

▹

[CONTINUE]

 

6.

▹

Position the supplied calibration pin between

the grippers of the swivel arm and clamp with

the two buttons.

7.

▹

[CONTINUE]

 

8.

▹

The supplied gauge bushing is put on one of

the calibration pins.

9.

▹

The swivel arm is positioned by hand, unless

both pins are positioned just behind each oth-

er.

10.

▹

[CONTINUE]

11.

▹

 

12.

▹

Loosen the socket screws of the rotary incising

unit with a hex key and adjust the height in a

way, until the two gauge pins have an identical

height.

13.

▹

[CONTINUE]

 

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments