manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 140 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 140

13. Maintenance / maintenance schedule

140 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

4.

▹

Open or close the blades step by step. During

blade movement insert and remove the cali-

bration pin and repeat this action until the pin

fits exactly in the blade opening.

Caution:

 Slide the pin carefully without expen-

diture of energy through the blade opening!

Otherwise there is a risk of damaging the

blades

5.

▹

[CONTINUE]

 

6.

▹

[CALIBRATE...]

➥

 

The set up value is saved.

7.

▹

[CONTINUE]

8.

▹

[OK]

➥

 

The calibration is done now.

 

Cutting unit

An additional calibration of the rotary incising unit involves the positioning of the swivel arm on the

opening of the rotary incising unit and is done via a wizard.

1.

▹

To be able to perform the calibration, a homing

action must be executed first.

 

2.

▹

By touching the buttons the centering is put

into the desired starting position.

3.

▹

[CONTINUE]

 

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments