manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 104 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 104

9. Configuration settings

104 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

■

Reference angle [°]:

 Angle against the base unit.

■

Reference position:

 Position against the base unit.

Cutting unit

■

Calibrate...:

 The calibration of the cutting unit is carried out via a wizard, see chapter 

"13.4.4  Cali-

bration cutting unit (Page  145)"

.

■

Reference position:

 Display of the calibrated value.

■

Intersect:

 Value to intersect the raw material.

Crimping unit

This defines all settings according to the crimping unit.

Press:  

No settings yet.

Crimping unit:  

■

Calibrate...:

 The calibration of the crimping unit is carried out via a wizard, see chapter 

"13.4.6 

Calibration crimping unit (Page  150)"

.

■

Swivel arm angle [°]:

 Angle of the crimping unit to the swivel arm.

■

PushPull position:

 Handing over position from swivel arm.

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments