manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 68 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 68

7. General handling / operation

68 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

7.5

CONTROL SOFTWARE

7.5.1

Overview touch screen

The corresponding buttons for the commands, functions and the alpha numeric data entry will be

shown directly on the touch screen. A simple touch executes the desired function. Also status mes-

sages show up on the touch screen, depending on the function mode.
Keys and its state and other elements can be distinguished by means of a color scheme.

NOTICE

Property damage touch screen!

Operating the touch screen with sharp objects may damage the surface.
Only touch the screen with your finger or a suitable touch screen pen.

1

4

2

5

3

6

1

Production commands

2

Navigation area

3

Content area

4

Machine status/info area

5

Header line

6

Footer line

7.5.2

Visual representation of the operating elements and pictograms

Depending on the state of the operating elements they are distinguished with their color and shape:

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments