Schleuniger CoaxCenter 6000, Reference Manual, Page: 55 / 194

6. Installation / first commissioning
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
55 | 194
2.
▹
Fixate the cables with binders.
3.
▹
Hook-up the cable to the control box.
4.
▹
Switch on the machine on the mains disconnecter.
5.
▹
Move the safety cover down via the
[CLOSE]
key.
6.3
COMMISSIONING / SAMPLE CABLE
During Commissioning of the CoaxCenter 6000 , 10 coaxial cables are cut to length and stripped in sev-
eral layers with the rotary incising unit on both sides.
For our sample, the
CoaxCenter 6000 is equipped with the following components:
■
Rotary incising unit
■
Q - Cam 360
■
Wire straightener unit
■
Stacker unit
The article shall be processed as follows:
Value
Type Micro coax AWG 32 - 1.13
Length 60 mm
Stripping length jacket 1.2 mm
Stripping length shield 0.72 mm
Stripping length dielectric 1.05 mm
Tab. 3: Commissioning, sample cable
6.3.1
Preparation
1.
▹
If not yet done, switch on the machine by turning the mains disconnecter CW.
➥
The machine components are switched on, the axes are initializing and the control software
S.QAR is booting up.