Schleuniger CoaxCenter 6000, Reference Manual, Page: 144 / 194

13. Maintenance / maintenance schedule
144 | 194
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
4.
▹
Position the supplied calibration pin with one
end between the grippers of the swivel arm
and clamp with the two buttons.
5.
▹
[CONTINUE]
6.
▹
Move the swivel arm by hand until the very
end of the calibration pin is positioned exactly
on the cross hair of the reference block. Posi-
tion the very end of the calibration pin as close
as possible, to monitor the calibration position
correctly.
7.
▹
Touch
[CALIBRATE]
.
➥
The value is saved as zero-point.
8.
▹
[CONTINUE]
9.
▹
Loosen and remove the calibration pin by
touching the buttons.
10.
▹
[CONTINUE]
11.
▹
Push the PushPull axis in the direction of the
reference block up to the stop.
12.
▹
Touch [CALIBRATE] .
➥
The value is saved as zero-point.
13.
▹
[CONTINUE]
14.
▹
Remove the reference block and mount the
standard blades.
15.
▹
[OK]
➥
The calibration is done now.