Schleuniger CoaxCenter 6000 Reference Manual Download Page 120

Page: 120 / 194

11. Diagnostics / troubleshooting

120 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

Temperature [°C]:

Measures the temperature on the rotary motor.

Feeding unit

Not available yet.

Swivel arm

Display of information and direct manipulation of the swivel arm.

Push pull

Reference sensor:

Display, when the push pull axis is in the reference position.

Reference position:

Perform an initialization (homing) on the push pull axis.

Move swivel arm:

Move the swivel arm forth and back (fast/slow).

Gripper

Sensor guide:

Display, when the gripper is in the guiding position.

Move gripper:

Open or close the gripper, move to guiding position.

Swivel

Reference sensor:

Display, when the swivel arm is in the reference position.

Reference position:

Perform an initialization (homing) on the swivel arm axis.

Move swivel arm:

Move the swivel arm forth and back (fast/slow).

Cutting unit

Display of information and direct manipulation of the cutting unit.

Summary of Contents for CoaxCenter 6000



































































































































































































Search results

Summary of Contents for CoaxCenter 6000

Reviews:

Schleuniger CoaxCenter 6000, Reference Manual, Page: 120 / 194

Search results

Summary of Contents for CoaxCenter 6000

Reviews: