manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 113 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 113

11. Diagnostics / troubleshooting

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

113 | 194

2

3

1

4

1

Last two messages

2

Current Message list

3

Message log

4

Error

■

Last two messages:

 In the header line of the touch screen the last two pending messages are

displayed.

■

Current message list:

 Displayed here are all pending messages or not confirmed messages.

These are errors, warnings and information which occurred during the last production run, see

also chapter 

"7.5.7.6  Dialog window (Page  72)"

. A total of 100 messages can be displayed.

Current error messages must be read and confirmed with 

[OK]

 before the production is continued.

Always all pending errors are confirmed automatically, not only the selected error.

■

Message history:

 In the history we find each message (except article errors). Thereby the time is

visible, the message occurred and when the message was confirmed or canceled.

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments