Schleuniger CoaxCenter 6000, Reference Manual, Page: 72 / 194

7. General handling / operation
72 | 194
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
Special entry fields and functions
Some fields (especially numeric fields) have a special function:
Password
A password is a combination of numbers and letters. Only stars are shown in the field.
The following characters are not allowed during password entry: \\ / : * ? \ „ < > | and all not English
characters.
Protected
Protected entry fields cannot be activated and no data entry can be made. Entry fields are protected
e. g. if the user has no access right to it, or the change of the value is not provided in the actual pro-
gramming mode. In this case, normally the field disappears completely.
Inch / mm
All values in fields containing length units, are in „Inch” or „Millimeter”. The length unit to be used has
to be set in the "Configuration".
Dialog window
During programming or the production, the data entry is checked against their validity. After a
parameter change often a message is shown, which action the user intends to correct or which
informs him when he made a mistyping (e. g. if the value is out of the physical range).
The messages are represented in the corresponding colors:
■
Information: Blue bar
■
Warning: Yellow bar
■
Error: Red bar
Information
An information is shown if the CoaxCenter 6000 outputs a message or if
a user action is pending.
Warning
A warning is shown if a requested action from the user is risky (e. g.
data loss).