manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Reference Manual, Page: 132 / 194

Share
Download
Schleuniger CoaxCenter 6000 Reference Manual Download Page 132

13. Maintenance / maintenance schedule

132 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

Blade change rotary incising unit

Task

Replacement of worn out blades on rotary incising unit.

Goal

The cutting edges of the blades are in good condition. The optimal process-

ing quality is guarantied.

Duration

15 Min.

Interval

Improper processing quality

Personnel qualifica-

tion

"Qualified personnel (Page 15)"

Support tools

■

Hex key

■

Screwdriver

Prerequisite

■

Machine switched off and unplugged from the mains- and the com-

pressed air supply

■

Safety cover open

1.

▹

Drive the safety cover up.

2.

▹

Switch off and unplug the machine from the mains- and the compressed air supply.

3.

▹

Loosen the lever and move the rotary incis-

ing unit via the sliding mechanism to the

back.

 

4.

▹

Loosen the upper hex screw on the rotary

incising unit.

5.

▹

Swivel down the front plate assembly.

 

6.

▹

Loosen the eight screws on the head and

remove.

7.

▹

Remove the blade cover.

 

Summary of Contents for CoaxCenter 6000



































































































































































































Reviews:

No comments