Schleuniger CoaxCenter 6000, Reference Manual, Page: 17 / 194

2. Safety
Reference Manual |Edition 5.0 (09-2016) | CoaxCenter 6000
17 | 194
2.4
GENERAL SAFETY NOTES
■
The product must only be operated when in good working order and condition. It must be
checked for intactness prior to the start of operation.
■
Never operate the product in an explosive or flammable environment.
■
Only operate the product in a dry, dust-free environment.
■
Processing carbon fiber or similar wire material disperses electrically conducting parts. This cause
short circuit in the electronics. Thus electronic components may be damaged. Use appropriate
suction appliances.
■
Before carrying out any maintenance or repair work, unplug the machine from the mains and/or
from the compressed air supply.
■
After completing maintenance work on the wiring or the electronic components, always perform
the safety check.
■
Only operate the product with connected earth conductor in the power cord.
■
Only use original Schleuniger equipment, especially interface connection cables (electromagnetic
compatibility).
■
Compulsory operate the product connected to the Schleuniger emergency stop circuit, if it is
operated together with peripheral devices in a production line. Only then can a safe interruption
of the complete production line be guaranteed during an emergency.
■
Only use supplied lubricating grease according to the instructions given in this manual.
■
Maintenance and modification work must be carried out by appropriate qualified personnel.
2.5
RESIDUAL RISKS
With the use of technical products are dangers associated. Dangers that could not be eliminated by
design measures and also not by protection devices are residual risks. The safety instructions in this
instructions refer to the known residual risks. Should be shown additional operational risks, the opera-
tor is obliged to inform Schleuniger immediately.
However, the following risks remain:
■
Danger due to catching body parts and clothing in the wire axis between peripheral devices and
the wire processing machine.
●
Always close off these areas
■
Danger due to stab wound or concussion injury or to death on the outlet. Wires/cables are ejec-
ted at high speed.
●
Always close off this area!
■
Danger due to blocked wire/cable on the inlet. Tensile forces can move to overturn machine,
peripheral or bobbin and injure the operator personnel.
●
Fixate machines and devices
●
Ensure a continuing wire/cable supply
■
Danger of tripping, falling, slipping due to connection cables, wire residue and air hoses lying
around.
●
Lay out connecting cables and hoses accordingly
●
Collect wire residue
●
Keep the area around free from non associated items.
■
Risk due to increased noise level while working in an environment with multiple machines.
●
Take up noise control measures!
■
Some wires/cables contain Talc. This contaminates the working environment during production.
●
Install the suction unit