Page 28
496759
4.
Enter the number of rings you wish Homelink to wait until answering.
The display shows (for example):
AUTO-ANSWER
10_
5. Press
EXE.
The display shows the number of rings you
entered.
AUTO-ANSWER
10 RINGS
Note: Enter 0 to disable auto-answer.
Auto-Answer (Speech)
Some users may be concerned that the Auto-Answer option will allow the
monitoring centre to eavesdrop on them. In such cases there are two
methods for maintaining the user’s privacy:
•
The privacy switch at the rear of the unit. Turning this to means that
the monitoring centre CANNOT listen through the Homelink, but CAN
speak to the user through it.
•
The Auto-Answer (speech) option. The PSION displays this option if
you have specified a number of rings for Auto-Answer. Setting this
option to “Disabled” means that the monitoring centre can neither hear
nor talk to the user.
Note: If you do enable Auto-Answer (speech) then while the speech path is open
Homelink gives a tone every 18 seconds to alert the user.
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press down arrow until the display shows the words “AUTO-ANSWER
SPEECH”.
The displays shows:
AUTO-ANSWER
SPEECH DISABLED
(Note that this is the default.)
3.
Press left (or right) arrow.
The display shows:
AUTO-ANSWER
SPEECH ENABLED
Auxiliary Output Mode (Optional)
The optional auxiliary alarm output provides a voltage free change-over
contact that can switch 1A at 24V. You can program the Homelink to activate
the contact at one of the following events:
• Communications Failure - Homelink could not report successfully to one
or more of its assigned telephone numbers.
• Alarm trigger - someone has used an emergency trigger.
• Remote trigger - A central station (or called party using a DTMF phone)
sends the appropriate signals.
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
