Page 24
496759
3. Press
EXE
The display shows:
ENTRY/EXIT TIME
_
4.
Key in the number of seconds you wish the for the entry/exit time.
The display shows the time you enter,
for example:
ENTRY/EXIT TIME
99
5. Press
EXE
The displays shows the time converted to
minutes and seconds. Note that the programmer
rounds the time to the nearest six seconds.
ENTRY/EXIT TIME
1:42 MINS:SECS
Mains Fail Delay
To prevent Homelink reporting short duration power cuts set a delay using
this option. If power is restored before the delay ends then Homelink will not
make a Mains Fail report. In addition, Homelink adds a random 1 to 15
minute delay to prevent the monitoring centre’s telephone line being
swamped with calls.
Homelink reports a mains failure immediately if you set the delay to zero.
If you have selected Mains Restoral in the reporting map then Homelink will
wait some random time between 1 and 15 minutes after the mains has been
restored before sending a report.
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press down arrow until the display shows the words “MAINS FAIL
DELAY”.
The display shows:
MAINS FAIL DELAY
60 MINUTES
3. Press
EXE.
The display shows:
MAINS FAIL DELAY
_
4.
Enter the time in minutes you require for the delay. (The maximum
delay is 99 minutes.)
The display shows, for example:
MAINS FAIL DELAY
34_
5. Press
EXE.
The display shows the time you entered.
MAINS FAIL DELAY
34
MINUTES
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
