Scantronic HOMELINK EXTRA, Programming Manual

Page: 22 / 40

Page 22 496759
2. Press down arrow until the display shows the words “HABIT CYCLE”.
The display shows:
HABIT CYCLE
DISABLED
3. Press EXE.
The display shows:
HABIT CYCLE
_
4. Key in the number of hours required between each reminder.
The display shows the time you enter,
for example:
HABIT CYCLE
12_
_
5. Press EXE
The PSION removes the cursor and shows
the number of hours you entered.
HABIT CYCLE
12 HOURS
Test Call Timer
You can program Homelink to make regular calls to the monitoring centre in
order to check the whole system. You can set the interval between calls to
be anything from 1 to 32 days, in one day steps. If you set the interval to
zero days then Homelink does not make any test calls.
When a monitoring station receives the call the operator sees a message
marking it as a test call and not an emergency call. A test will be made if no
other call has been triggered during the time period selected (but see "Test
Call Delay").
Note that you must also set up the reporting map.
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2. Press down arrow until the display shows the words “TEST CALL”.
The display shows:
TEST CALL
DISABLED
(Note that this is the default.)
3. Press EXE
The display shows:
TEST CALL
_
4. Key in the number of days Homelink should wait between test calls.
The display shows the time you enter,
for example
TEST CALL
2_
5. Press EXE
The displays shows the number of days you
entered.
TEST CALL
02 DAYS