496759
Page
27
2. Scantronic recommend that you precede each telephone number by 'D' (Dial
tone detect) to take full advantage of this function.
3. Select 'None" for normal operation.
4. Select 'Answer and Retry' for those countries where first party clearing is
possible.
Remote Program
A monitoring centre can reprogram some Homelink options by using a DTMF
telephone. To allow a monitoring centre access to a user’s Homelink unit you
must set the Remote Program option to “Use Away Button”. When the call
between monitoring centre and Homelink unit is established, the user must
press AWAY to prepare the Homelink unit for programming. In addition, you
must also program the Homelink with a Security Code (see page 29).
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press down arrow until the display shows the words “REMOTE
PROGRAM”.
The display shows:
REMOTE PROGRAM
DISABLED
(Note that this is the default.)
3.
Press left (or right) arrow.
The display shows:
REMOTE PROGRAM
USE AWAY BUTTON
Auto-Answer (Enable)
Some users may not have a telephone attached to their Homelink. In those
cases you must program Homelink to answer incoming calls by itself. The
option for doing this is “Auto-Answer”, which only appears on the PSION if
you set Remote Program to “Use Away Button”. In order to make sure
Homelink does not answer every incoming call the Auto-Answer option lets
you specify a number of rings that Homelink will wait before answering. The
default number of rings is 20.
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press down arrow until the display shows the words “AUTO-ANSWER”.
The display shows:
AUTO-ANSWER
20 RINGS
(Note that this is the default.)
3. Press
EXE.
The display shows:
AUTO-ANSWER
_
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
