496759
Page
19
Report To
You can specify how Homelink is to attempt to call its programmed phone
numbers in two ways: Single Number or Multiple Numbers.
In SINGLE NUMBER reporting Homelink requires a single response from
only one of the programmed numbers. If, for example, the first number that
Homelink calls gives a response then Homelink does not try to call any of the
other programmed numbers.
In MULTIPLE NUMBERS reporting Homelink requires a response from all
the programmed numbers (up to a maximum of four). Homelink calls each
number in turn until either they have all responded or Homelink has made
the maximum permitted number of attempts.
For example, if you want Homelink to call:
a)
A relative first,
b) A
central
station
Then:
•
Program Telephone Number 1 with the telephone number of the
relative.
•
Program Telephone Number 2 with the telephone number of the
central station
•
Set Reports to Single Number.
Homelink will phone the relative first, and if they do not acknowledge with
“5”, it will call the Central Station. This cycle will repeat until one party
acknowledges the call.
To set the option:
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press the down arrow key until the display shows the words “REPORT
TO”.
The display shows:
REPORT TO
SINGLE NUMBER
3.
Use right or left arrow to switch to SINGLE NUMBER or MULTIPLE
NUMBERS.
The display shows (for example):
REPORT TO
MULTIPLE
NUMBERS
Speech Only
This option applies to telephone numbers with Speech Only comms format
answered using DTMF telephones. (Note that this option will only appear if
at least one telephone number has been given Speech Only comms format.)
The options are:
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
