Scantronic HOMELINK EXTRA, Programming Manual

Page: 18 / 40

Page 18 496759
3. Use number keys 1 to 4 to toggle reporting ON or OFF to individual
telephone numbers.
The display changes each time you press number
keys 1 to 4. For example, if you press 1 then the
bottom left of the display shows:
PENDANT
OFF ON OFF OFF
4. Use down arrow to display the next device, for example:
LOCAL ALARM
ON ON OFF OFF
Note:
• If you switch reporting OFF for all four telephone numbers then the bottom
line of the display shows the words “NOT REPORTED”. Switching reporting ON
for any of the telephone numbers changes the display to show (for example)
“ON OFF OFF OFF”.
• If you have connected a Movement Detector to Homelink to detect that the
user is still active, then you must set INACTIVITY to ON for the relevant
telephone number. (See also Activity Monitor.)
• If you want Homelink to report to the monitoring centre that it has lost mains
power then you must set MAINS FAIL to ON for the relevant telephone number.
• To make Homelink report that it has regained mains power then you must
set MAINS RESTORAL to ON for the relevant telephone number.
Hard Wired Inputs
Behind the access panel in the base Homelink provides a connection for a
hard wired alarm input, see Figure 1 on page 6. The connection is suitable
for either normally closed or normally open contacts. The connecting cable
must not exceed 50 metres in length.
Homelink Extra will accept and separately identify a single hardwired device.
The following options are available:
• Local
alarm
• Intruder/Inactivity
• Fire
• PA
• Low
Temperature.
To set the option:
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2. Press the down arrow key until the display shows the words -
“HARDWIRED INPUT”.
The display shows:
HARD WIRED INPUT
LOCAL ALARM
3. Use the right and left arrow keys to select the device type.
Note: The default setting will be the Local Alarm extension to the orange
Emergency button.