Page 16
496759
5. Press
EXE.
The display shows the completed number
without the cursor:
TELEPHONE NO. 1
P01234567890
Note:
• To request a pause in the telephone number press “-”. The display shows “-
”, which changes to a “P” when you press EXE.
• To make Homelink wait until it hears dial tone at any point press “+”. The
display shows “+”, which changes to a “D” when you press EXE.
• To enter a “#” press “/”. The display shows “/”, which changes to a # when
you press EXE.
• To enter a “*” press “*”.
• Do not program the telephone numbers of the emergency services (for
example “999”).
Comms Format
Homelink has two main reporting types: Digital and Speech Only.
In DIGITAL reporting Homelink sends signals identifying the source of the
call and may also open a voice channel. This type of call can only be
answered by a central station possessing the correct equipment. Digital
format varies slightly depending on the manufacturer of the equipment at the
central station. Homelink can use either of two Scantronic formats:
• Use “SCANCOM” or “SCANCOM FF” if Homelink is reporting to a
monitoring station using Scantronic monitoring equipment.
• Use “SPEECH ONLY” if Homelink is reporting to a telephone set.
If you need to use any other format please contact your supplier.
In SPEECH ONLY reporting Homelink makes a phone call and plays any
recorded message it has stored (it does not try and send signals identifying
the source of the call). This format is designed for emergency calls directed
to someone who does not have special answering equipment, but may be
acting as a central station, for example a helper.
If the helper has a DTMF phone, then on receiving the call they can control
the speech channel by pressing keys on the telephone keypad.
Pressing 1 Allows the helper to listen through Homelink’s microphone.
Pressing 2 Lets the helper speak to the caller.
Pressing 3 Lets the helper replay any recorded message.
Pressing 5 Ends the call. This tells Homelink that the call was successfully
received, and it will no longer attempt to call that number.
Pressing * Toggles between talking and listening.
Pressing 0 Switches ON the Auxilliary Output Relay (if it has been
programmed for Remote Operation).
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
