Page 20
496759
• Single Call - Homelink calls each number with Speech Only comms
format once.
• Multiple Calls - Homelink calls each number with Speech Only comms
format according to the setting of the Report To option. Homelink marks a
call as successful when it receives a DTMF “5” from the called party.
To set the option:
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press the down arrow key until the display shows the words “SPEECH
ONLY”.
The display shows:
SPEECH ONLY
SINGLE CALL
3.
Use right or left arrow to switch to SINGLE CALL or REPEAT CALLS.
The display shows (for example):
SPEECH ONLY
REPEAT CALLS
To Answer Speech Only Call Attempts With Non-DTMF Phones
If you wish to call a telephone number that uses a pulse dialling phone then
the called party cannot send the correct signal to Homelink to end the call.
This means that Homelink may make repeated calls to the same number,
even though the called party has answered the call.
To prevent this the PSION programmer offers the option “Speech Only -
Single Call/Repeat Calls”. Set the option to:
•
“Repeat Calls” when calling a DTMF phone
•
“Single Call” when calling a pulse dial phone.
Guard Time
When a user presses EMERGENCY, or uses a pendant trigger, Homelink
bleeps for a short time before starting the emergency call. This wait (called
the Guard Time) is designed to allow the user to cancel the call if they
pressed EMERGENCY or used the pendant trigger by mistake. When
Homelink is delivered from the factory the Guard Time is set to 10 seconds.
To change this time:
1.
Start the HLEXTRA program and execute the PROGRAM command.
The display shows:
ACCOUNT NO. 1
2.
Press the down arrow key until the display shows the words “GUARD
TIME”.
The display shows:
GUARD TIME
10 SECONDS
3. Press
EXE
The display shows:
GUARD TIME
_
Summary of Contents for HOMELINK EXTRA
Page 38: ...Page 38 496759 Notes ...
Page 39: ...496759 Page 39 Notes ...
