29
INSTALLING SOAP 2
I n s t a l l i n g K a i ’s P h o t o S o a p 2
Installation instructions are provided for both Windows and Macintosh. Follow the
instructions appropriate to your system.
System Requirements (Windows)
Windows 95, Windows 98, Windows NT 4.0 with Service Pack 3 or later; 32 mb RAM for
Windows 95/98; 64 mb RAM for Windows NT; 100 mb of hard-disk space; CD drive; 16
or 24 bit color (24 bit preferred).
System Requirements (Macintosh)
Power PC; System 8.1 or later; 32 mb RAM; 100 mb hard-disk space; CD drive; 16 or 24
bit color (24 preferred).
Windows Installation
To install Soap 2 on a Windows computer:
1
Launch Windows.
2
Insert the Kai’s Photo Soap 2 CD-ROM into your computer’s CD-ROM drive. The
Install Soap 2 dialog appears.
3
Double-click the Kai’s Photo Soap 2 logo.
4
Follow the instructions provided by the installer.
5
The installation dialog displays an important ReadMe. Click “Continue” after
reading the complete ReadMe.
Macintosh Installation
To install Soap 2 on a Macintosh:
1
Insert the Kai’s Photo Soap 2 CD-ROM into your computer’s CD-ROM drive. The
Install Soap 2 dialog appears.
2
Double-click the Kai’s Photo Soap 2 logo.
Kai’s Photo Soap 2 is intended for local installation only. Do
not attempt to install it onto a network server.