Savin IS200e Operating Instructions Manual Download

Page: 53 / 240

Initial Scanner Setup

❖

The Method Row

Under “Method” in the table on the next page, there is a column for each of
the setup method listed below.

• A “

” in a column means that the setup item to the left can be configured us-

ing the method.

• A “x” in a column means that the setup item to the left cannot be configured

using the method. Use the other available method for the setting.

• A “-” in a column means that the item to the left cannot be changed (for the

display information purpose only).

• A “(null)” in the “Default” column means that the setup item to the left has

no factory default value.

Column name:

Means if:

Scanner

Each of the setup items to the left can be configured using the
control panel of this machine.

Web

Each of the setup items to the left can be configured using the
Web Status Monitor.

Summary of Contents for IS200e

















































































































































































































































Search results

Summary of Contents for IS200e

Reviews:

Related manuals for IS200e

Brands by name

Popular brands

Savin IS200e, Operating Instructions Manual

Search results

Summary of Contents for IS200e

Reviews:

Related manuals for IS200e

Brands by name

Popular brands