Savin IS200e, Operating Instructions Manual

Page: 63 / 240

System Settings
53
3
• Print Scan
When you select this option, the Print Scan Ready screen is displayed as
the initial screen.
❖ ❖ ❖ ❖
IP Address
When a fixed IP address is assigned to this machine on the network you use,
enter the IP address to this item in the form of xxx.xxx.xxx.xxx (xxx:0 through
255).
Do not specify this item manually when you use this machine on a DHCP en-
vironment. An IP address is automatically assigned to this machine by select-
ing “DHCP” for
[ Network Boot ]
.
❖ ❖ ❖ ❖
Subnet Mask
When a fixed IP address is assigned to this machine on the network you use,
enter the subnet mask to this item in the form of xxx.xxx.xxx.xxx (xxx:0
through 255).
Do not specify this item manually when you use this machine on a DHCP en-
vironment, because this item is automatically assigned to this machine by se-
lecting “DHCP” for
[ Network Boot ] .
❖
❖ ❖
❖
Default Gateway Address
When a fixed IP address is assigned to this machine on the network you use,
enter the default gateway address to this item in the form of xxx.xxx.xxx.xxx
(xxx:0 through 255).
Do not specify this item manually when you use this machine on a DHCP en-
vironment, because this item is automatically assigned to this machine by se-
lecting “DHCP” for
[ Network Boot ] .
❖ ❖ ❖ ❖
Access Control and Access Mask
Use these setup items together to determine which of client computers has
right to access this machine when it works as a network TWAIN scanner.
Each of the client computers is granted or denied its access to this machine by
its IP address, which is determined by an access control entry and an access
mask entry in combination. An access control entry is used as a reference val-
ue of the IP address, while an access mask entry determines the range of the
IP addresses.
• Access control is the value that becomes the reference for restricting the cli-
ent that uses this product as a network TWAIN scanner
• Access mask is the value to specify the restriction range. It is collated (log-
ically multiplied) with access control to limit clients that can use this prod-
uct as a network TWAIN scanner.
Specify both the access control and the access mask in the form of
xxx.xxx.xxx.xxx (xxx:0 through 255).