Savin IS200e Operating Instructions Manual Download Page 92

Page: 92 / 240

Configuring the Scanner Settings

Note

❒

Pressing

[

Cancel

]

discards the

selected option, and returns to
the Default Scan Settings menu.

GGGG

Press

[

↓↓↓↓

Next

]

“2. Resolution” appears as the set-
up item currently selected.

Note

❒

Press

[

Exit

]

to return to the par-

ent menu screen.

HHHH

Press

[

Settings

]

The setting screen for “2. Resolu-
tion” appears.

IIII

Select the resolution you want.

• The option that is currently se-

lected is displayed first.

• “*” mark appears along with the

option currently selected.

• Use

[

↑↑↑↑

]

and

[

↓↓↓↓

]

to display the

option you want to select.

To select a preset resolution

While the preset resolution
you want to select is displayed,
press

[

]

This saves the setting you have
selected, and returns to the De-
fault Scan Settings menu.

Note

❒

Pressing

[

Cancel

]

discards the

selected option, and returns
to the Default Scan Settings
menu.

To specify the resolution manually
using

[

Custom Resolution

]

While

[

Custom Resolution

]

is dis-

played, press

[

Settings

]

The setting screen for “Custom
Resolution” appears.

Specify the resolution manual-
ly by using the number keys.

Note

❒

To correct the number, press
the

{{{{

Clear/Stop

}}}}

key to clear

the number you have en-
tered.

Press

[

]

This saves the setting you have
entered, and returns to the De-
fault Scan Settings menu.

Note

❒

Pressing

[

Cancel

]

discards the

values you have entered, and
returns to the Default Scan
Settings menu.

JJJJ

Press

[

↓↓↓↓

Next

]

“3. Scan Size” appears as the setup
item currently selected.

KKKK

Press

[

Settings

]

The setting screen for “3. Scan
Size” appears.

Summary of Contents for IS200e

















































































































































































































































Search results

Summary of Contents for IS200e

Reviews:

Brands by name

Popular brands

Savin IS200e, Operating Instructions Manual

Search results

Summary of Contents for IS200e

Reviews:

Brands by name

Popular brands