Savin IS200e Operating Instructions Manual Download

Page: 152 / 240

Sending Scan File by E-mail

142

To start with an original on the exposure
glass

AAAA

Confirm that the E-mail Ready
screen is displayed.

When “

Select destination(s).

”

is displayed, no destination is select-
ed. Select a destination to display
“

Ready

” on the screen.

BBBB

Press the

{{{{

Start

}}}}

key.

Scanning the original on the expo-
sure glass starts.

Note

❒

To interrupt scanning, press the

{{{{

Clear/Stop

}}}}

key.

After the original is scanned prop-
erly, the message “

Set the next

original(s) and press the

Start key, or press [Finish]

to complete.

” appears.

CCCC

Place the next original on the ex-
posure glass, and then press the

{{{{

Start

}}}}

key.

DDDD

Repeat step

CCCC

as necessary.

EEEE

Press

[

Finish

]

when all the origi-

nals are scanned.

Note

❒

When “

Show Options after

Each Scan Job

” is selected for

[

End of Scan Option

]

under

[

2.Send Scan Settings

]

, a screen

for selecting the next operation
appears after you press

[

Finish

]

When scanning finishes properly,
the e-mail is sent to the e-mail
(SMTP) server.

appears at the

upper right corner of the screen
while the e-mail is sent.

Note

❒

You cannot perform any opera-
tions while

is displayed on

the screen.

❒

Do not turn the power of this
machine off while

is dis-

played on the screen.

disappears when the e-mail has

been sent to the e-mail (SMTP)
server, and the E-mail standby
screen appears.

AFJ044S

Summary of Contents for IS200e

















































































































































































































































Search results

Summary of Contents for IS200e

Reviews:

Related manuals for IS200e

Brands by name

Popular brands

Savin IS200e, Operating Instructions Manual

Search results

Summary of Contents for IS200e

Reviews:

Related manuals for IS200e

Brands by name

Popular brands