Section 6: Basic Specifications
Page 6-6
TH2 Series Operator Manual
6.2 OPTIONAL ACCESSORIES SPECIFICATIONS
CUTTER KIT SPECIFICATIONS
Media Type
Non-adhesive paper and Label
Media Size
Width (including liner)
: 28 to 63 mm (1.10” to 2.48”)
Pitch (including liner)
: 19 to 120 mm (0.74” to 4.72”)
Thickness
0.14 to 0.19 mm (0.006” to 0.007”)
Self-diagnosis function
Cutter error detection
Durability
More than 300,000 cuts
LINERLESS (NONESEPA) KIT SPECIFICATIONS
Kit Type
Linerless kit with cutter
Linerless kit without cutter
Media Type
Linerless Label
without perforated line
Micro-perforated Linerless Label
Media Size
Width:
28 to 60 mm (1.1” to 2.3”)
Pitch:
45 to 100 mm (1.7” to 3.9”)
Width:
28 to 60 mm (1.1” to 2.3”)
Pitch:
25.4 to 100 mm (1” to 3.9”)
Thickness
0.14 to 0.19 mm (0.006” to 0.007”)
Media Winding direction
Face-out
Roll and core Diameter
Maximum outer diameter: 75 mm (2.9”) with Inner core diameter: 26 mm (1.0”)
Sensor Type
Label sensor (Reflective type)
Label issuing mode
Cutter mode
Continuous mode, Tear-off mode
BATTERY SPECIFICATIONS
Model Name
PT/MB400-BAT
Battery Type
Lithium ion battery
Rated Voltage
14.8 V
Rated Capacity
1700mAh (TYP)
Dimensions
43 mm (W) X 20.4 mm (D) X 109 mm (H)
1.7” (W) X 0.8” (D) X 4.3” (H)
Weight
Approximately 170 g (0.37 lbs)
Charge cycle
Approximately 300 times
Charging time
Approximately 6 hours (Fully charges with the printer unit)
Approximately 1.5 hours ( Charged by dedicated charger)
