Section 3: Configuration and Operation
TH2 Series Operator Manual
Page 3-5
3.1 OPERATOR PANEL (Cont’d)
List of Icons (Cont’d)
3.1.1 To navigate and select item within the Menu
When the menu displayed a list of selection, you may use arrow buttons or the
numeric buttons to make selections.
• When using arrow buttons
Press the , arrow buttons to scroll to the desired item. The solid bar with
reverse text indicates the selected item. Press
enter or arrow button to
confirm the selection and the selected sub-menu will displayed.
The display can only display four items at a time. Continually press the ,
arrow buttons to display other items if any.
• When using numeric buttons
Press the associated numeric buttons to select the desired item. The selected
sub-menu will be displayed directly.
Notes:
Press
page up or arrow button to return to the previous menu.
No
Icon
Description
6
Displayed only when printer is powered by the battery.
• 0 cell: Battery empty
• 1 cell: Battery low
• 2 cells: Battery half
• 3 cells: Battery full
7
These icons are displayed only on the wireless LAN printer.
• Displayed during startup. Indicates that LAN card is not responding.
• Displayed when the LAN card is searching for signal.
• Wireless field strength -- Weak
• Wireless field strength -- Good
• Wireless field strength -- Excellent
8
Displayed when the
F2
button has been pressed once during input mode. It is then
possible to scroll within a column by using the ,
arrow buttons.
9
Displayed when the
F2
button has been pressed twice during input mode. It is then
possible to scroll between columns by using the ,
arrow buttons.
10
Wrench icon displayed during EDIT mode or Printer Set up.
11
Peel Sensor: This animation indicates “Peeled label not removed”.
12
Busy.
Rotating hourglass indicates that printer is busy. Such as, saving a format.