Section 3: Configuration and Operation
TH2 Series Operator Manual
Page 3-71
3.8 ADVANCED SETUP MENU (Cont’d)
1. Make sure the power of the printer is turned off.
2.
Press and hold the
enter button and then press the
power button to turn on the printer. Release the
enter button only when a long beep sound is heard.
3.
Password is required before entering to
ADV SETUP
menu.
PASSWORD
input screen is displayed.
The default passwords are 6677 (MANAGER) and 96726 (ADMIN). These two passwords can be changed
in the later procedure.
Enter the password with the numeric buttons and then press
button.
4. ADV SETUP
menu is displayed, select the desired option from the list.
Menu
Description
ADV SETUP
menu.
Enables the selection of
1.Start App., 2.Setup, 3.Hex Dump, 4.Change PW,
5.Reset, 6.Console, 7.USB, 8.Disp adj. (Cutter adj.)
or
9.Continue
.
Note
:
If a cutter is installed, the menu choice #8 will be
8. Cutter adj
.
START APP
menu.
Enables selection from a list of customer applications to choose as start-up
applications.
The list may vary according to the number of customers applications.
This display shows the selection of
1.Standard
as general.
Enables access to
Printer SETUP
menu.
Please refer to
Section 3.7 Printer Setup Menu
for details.
Hex Dump
menu.
The printer will output hexadecimal values of data that is sent from a host com-
puter over USB, LAN or WLAN. Output can be to a printed label or to a file that
is stored in the temporary RAM file system of the printer.
Enables the selection of
1.Printout
or
2.To File
.
When
1.Printout
is selected, the printer will output hexadecimal values of the
data that is sent from a host computer over USB, LAN or WLAN.
The HEX Dump output will be printed on the label.
When
2.To File
is selected, the hex dump is saved to the temporary RAM file
system of the printer. The file path is /tmp/dump.bin. Dump.bin is the binary file
name.
CHANGE PW
menu.
Enables the selection of
1.admin
or
2.manager
.
