Section 3: Configuration and Operation
Page 3-44
TH2 Series Operator Manual
3.7 PRINTER SETUP MENU (Cont’d)
Menu
Description
Printer SETUP
menu.
Enables the selection of
1.Profile
,
2.Media
,
3.Print Ctrl
,
System
,
Regional
or
6.Network
Select
2.Media
for series of media settings.
MEDIA
menu.
Enables the selection of
1.Size
,
2.Sensor Type
,
3.Calibrate
or
4.Max feed.
Select
1.Size
to set media size.
Enables selection of
1.Length
or
2.Width
from media
SIZE
menu.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in
UNIT
menu.
Default unit is in
dot
.
Displays the media length range and input field with existing media length and
its unit.
Enables input of new media length.
Note:
If the value is outside the allowed range,
Invalid
will be displayed.
If the value is acceptable,
Saved
will be displayed when
enter button is
pressed.
Displays the media width range and input field with existing media width and its
unit.
Enables input of new media width.
Note:
If the value is outside the allowed range,
Invalid
will be displayed.
If the value is acceptable,
Saved
will be displayed when
enter button is
pressed.
MEDIA
menu.
Enables the selection of
1.Size
,
2.Sensor Type
,
3.Calibrate
or
4.Max feed.
Select
2.Sensor Type
to set media sensor.
Displays existing
SENSOR TYPE
selection and enables new selection.
The default is set at
2.I-Mark
The “pressed radio button” indicates the current selection until the new selec-
tion is chosen and
enter button is pressed.
When selecting
3.None
, the label length will be equal to the length of the printed
format.
When selecting
4.Fix
, the label length will be equal to the media set up length
+2 mm even if the format is shorter.
Note:
The view of the sensor type menu is depended of the Media Handling selection.
